The SmallRig Super Clamp review is for creators who want a simple way to mount compatible accessories to a nearby edge, bar, or support.
Its adjustable jaw and 1/4-inch and 3/8-inch threaded holes make it a flexible building block for compact camera setups.
Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact camera clamp for creators who need to attach compatible gear to shelves, bars, or other surfaces within its jaw range.
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp surfaces are intended to help prevent slipping and scratching.
Pros
- Small and lightweight enough to pack with a camera kit.
- Two thread sizes give it more attachment options than a clamp with only one mounting interface.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The clamp alone does not provide an articulating arm or a complete camera positioning system.
Read the full review summary
This clamp combines a small, lightweight body with a jaw that opens from 15 mm to about 40 mm.
The rubber pads are intended to help reduce slipping and surface scratches, while the threaded holes provide mounting points for compatible accessories.
It suits photographers and video creators who have a suitable surface close to their setup and want to add a camera or accessory mount without a dedicated stand.
Before buying, check the thickness and shape of the mounting point, the fitting required by your accessory, and whether your complete rig stays within the stated maximum weight recommendation.
The buying factors
Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is designed for varied surfaces, and its two thread sizes provide options for attaching compatible accessories.
Jaw range
The 15–40 mm opening covers many small bars and edges, though the intended mounting surface must fit within that range.
Accessory compatibility
Both 1/4-inch and 3/8-inch threaded holes support a range of attachments, subject to matching the accessory connection.
Portability
At 0.13 kg and described as compact when folded, it should be easy to include in a small kit.
Surface contact
Rubber pads are designed to help protect the contact area and reduce slipping, though the specific surface and load still matter.
Rig capacity clarity
A maximum weight recommendation is provided, but buyers should consider the full mounted setup and how it will be used.
Key Features and Specifications of Super Clamp
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp surfaces are intended to help prevent slipping and scratching.
- Designed for mounting to surfaces such as hooks, shelves, plate glass, and cross bars, as well as other suitable supports.
- Compact design with a listed item weight of 0.13 kg.
- The package includes one super clamp; the listed maximum weight recommendation is 3.3 pounds.
Pros and Cons of Super Clamp
Pros
- Small and lightweight enough to pack with a camera kit.
- Two thread sizes give it more attachment options than a clamp with only one mounting interface.
- The 15–40 mm jaw range supports a variety of appropriately sized mounting points.
- Rubber pads are intended to protect contact surfaces and help limit movement.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The clamp alone does not provide an articulating arm or a complete camera positioning system.
- Buyers need to confirm their accessory’s thread and the suitability of the mounting surface before relying on the setup.
Who Should Buy Super Clamp?
Good fit
Consider the Super Clamp if you regularly need to mount a lightweight accessory to a rail, shelf edge, or other stable surface that falls within its jaw range.
Its compact form is useful when a full stand would take up too much space, and the threaded holes offer a practical starting point for building a compatible mount.
It can also make sense as a flexible addition to a small production kit when you already own the relevant attachment hardware.
Check the combined weight of the clamp, accessory, and any extension pieces against the stated maximum recommendation, and consider how much leverage an extended setup will place on the mounting point.
Who should skip it
Skip it if your mounting surface is outside the 15–40 mm jaw range or if your setup requires a clamp that includes an articulated arm in the same package.
For a camera or accessory you cannot afford to have shift, confirm that the surface is stable, the connection fits correctly, and the arrangement is appropriate for the way you plan to use it.
How the Super Clamp Fits a Compact Camera Rig
Check the mounting surface first
The jaw range is the key fit constraint: the surface needs to be at least 15 mm and no more than about 40 mm thick.
Shape and stability also matter, so check the actual contact area rather than measuring thickness alone.
Plan the accessory connection
The 1/4-inch and 3/8-inch threaded holes let the clamp serve as a base for compatible mounting hardware. Confirm the accessory’s thread size and whether the connection needs an adapter before assembling the rig.
Keep the setup compact
At 0.13 kg, the clamp is easy to carry as a standalone mounting option. Since no positioning arm is included, the final placement depends on where the clamp can attach and what compatible hardware you bring.
Treat the weight guidance as a limit to assess
The product details give a maximum weight recommendation of 3.3 pounds. For a practical setup, account for the entire mounted assembly and how far it extends from the clamp, then make sure the supporting surface is suitable.
Alternatives to Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the main Super Clamp when you want a compact clamp base with 1/4-inch and 3/8-inch threaded holes.
Consider this double ball head version if built-in angle adjustment and the included action camera adapter better match your mounting needs.
- This clamp mount includes a double ball head and an action camera mount adapter, and is described for attaching equipment to rods, tubes, tables, and frames.
- The Super Clamp provides an adjustable jaw and threaded holes, but does not include a positioning arm in the package.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the main Super Clamp for a smaller standalone clamp when the mounting surface fits its jaw range.
Consider the kit if you need a longer reach, angle adjustment from an included arm, or a wider maximum jaw opening.
- This kit includes a clamp with a maximum opening of 54 mm and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
- The main clamp is a standalone unit with a jaw range of 15–40 mm.
Is Super Clamp Worth It?
The SmallRig Super Clamp is worth considering when you need a compact, adaptable clamp base and your mounting surface falls within its 15–40 mm jaw range.
Its two thread sizes and protective pads make it a useful starting point for a small accessory setup.
Check thread compatibility, the stability of the mounting point, and the complete rig’s weight before buying. If you need an arm or built-in angle adjustment, choose a setup that includes those parts.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact camera clamp for creators who need to attach compatible gear to shelves, bars, or other surfaces within its jaw range.
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp surfaces are intended to help prevent slipping and scratching.