Product Reviews

SmallRig 2066B Adjustable Articulating Magic Arm Review

A flexible camera rigging arm for creators positioning a lightweight monitor, light, or microphone on compatible 1/4-inch mounts.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Adjustable Articulating Magic Arm review centers on a simple rigging tool: a 9.8-inch arm with 1/4-inch screws at both ends and two adjustable ball heads.

It suits camera creators who need to position a compatible monitor, light, or microphone around a rig, provided the attached load stays within its 213-gram maximum recommendation.

SmallRig Magic Arm Review Summary

The quick verdict

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible camera rigging arm for creators positioning a lightweight monitor, light, or microphone on compatible 1/4-inch mounts.

  • 9.8-inch articulating arm for positioning a rig accessory away from its mounting point.
  • Double ball-head design with 360-degree adjustment for positioning at different angles.
  • 1/4-inch thread screws at both ends, for compatible equipment such as a camera flash, microphone, LCD monitor, or LED light.
  • A rubber O-ring cushion around a 1/4-inch screw, designed to help prevent monitor scratches and tighten the connection.

Pros

  • Dual ball heads offer flexible positioning at both ends of the arm.
  • The 9.8-inch reach gives more placement room than a short direct adapter.

Consider before buying

  • The 213-gram maximum recommendation rules out many heavier monitors and accessories.
  • A clamp or other compatible mounting point must be supplied separately.
Read the full review summary

The 2066B offers an adaptable connection between two accessories or mounting points. Its double ball-head design can rotate through 360 degrees, while the arm’s length gives you room to place a device away from its mounting point.

A rubber O-ring around a 1/4-inch screw is intended to cushion the monitor connection and help it lock more tightly.

This is a focused accessory for a rig that already has compatible 1/4-inch connections.

It may suit a compact monitor or similarly light device, but the maximum recommended load is modest, so check the weight of the complete accessory you plan to mount.

The arm itself does not include a clamp or a base for attaching to a desk, pole, or other surface.

The buying factors

SmallRig Magic Arm Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Angle flexibility

The two 360-degree ball heads allow broad positioning adjustments at the arm’s ends.

8/10

Connection compatibility

Both ends use 1/4-inch threads, a common connection for camera-rig accessories described for this arm.

7/10

Reach

Its 9.8-inch length provides useful separation between a mounting point and an accessory.

5/10

Load suitability

The 213-gram maximum recommendation limits it to carefully chosen lightweight gear.

7/10

Contact protection

A rubber O-ring at the screw is designed to cushion a monitor connection and help it lock more tightly.

7/10

Setup simplicity

The two threaded ends make the connection concept straightforward when the rig already has compatible mounts.

Key Features and Specifications of SmallRig Magic Arm

  • 9.8-inch articulating arm for positioning a rig accessory away from its mounting point.
  • Double ball-head design with 360-degree adjustment for positioning at different angles.
  • 1/4-inch thread screws at both ends, for compatible equipment such as a camera flash, microphone, LCD monitor, or LED light.
  • A rubber O-ring cushion around a 1/4-inch screw, designed to help prevent monitor scratches and tighten the connection.
  • Maximum weight recommendation of 213 grams; account for the weight of the mounted accessory when checking suitability.
  • Listed compatible devices include cameras and monitors; the design can also connect to compatible cage, rail, or handle accessories.

Pros and Cons of SmallRig Magic Arm

Pros

  • Dual ball heads offer flexible positioning at both ends of the arm.
  • The 9.8-inch reach gives more placement room than a short direct adapter.
  • Standard 1/4-inch threads support a range of compatible camera-rig accessories.
  • The rubber screw cushion is a useful touch where the connection meets a monitor.

Consider before buying

  • The 213-gram maximum recommendation rules out many heavier monitors and accessories.
  • A clamp or other compatible mounting point must be supplied separately.
  • The longer arm creates more reach, but buyers should check that the intended position and accessory weight suit this arm.

Who Should Buy SmallRig Magic Arm?

Good fit

Consider the SmallRig Magic Arm if your camera cage, handle, or other support already has a 1/4-inch connection and you want to adjust the position of a light accessory.

Its two ball heads offer more freedom to aim the mounted item than a fixed threaded adapter, and the 9.8-inch length can help move it clear of nearby controls or equipment.

Before buying, weigh the complete item you plan to attach and compare it with the 213-gram maximum recommendation.

Check the thread type at both connection points as well; this arm has 1/4-inch screws on both ends, so it is best suited to a rig with matching interfaces.

Who should skip it

Skip this arm if your planned monitor, light, or other accessory exceeds the 213-gram recommendation. Also look elsewhere if you need an included clamp or a mount designed around a different connection type.

How the SmallRig Magic Arm fits a camera rig

Flexible positioning from two ball heads

The double 360-degree ball-head arrangement gives the arm adjustment at each end. That can help angle an accessory toward the operator or reposition it around other rig components.

The usable setup still depends on where the arm attaches and how much clearance the attached item needs.

A reach that calls for a weight check

At 9.8 inches, the arm can place gear farther from its mounting point than a very short adapter. Reach can be useful when arranging a monitor or light, but the stated 213-gram maximum recommendation is an important constraint.

Weigh the accessory itself and account for any attached pieces before deciding it fits the intended setup.

Threaded ends and the rubber cushion

Both ends use 1/4-inch screws, making the arm a practical link between compatible cage or handle mounts and supported accessories. The rubber O-ring is intended to cushion the monitor-side connection and help it lock more tightly.

Verify that the receiving mount has the matching thread and that the contact surface is appropriate for the item you plan to attach.

Alternatives to SmallRig Magic Arm

Camera Mounts & Clamps alternative

SmallRig 2732 Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 Magic Arm Clamp Kit

Choose the 2066B for a lighter accessory on a rig that already provides matching mounts.

Consider the 2732 if you need a clamp in the same kit or want its stated 3/8-inch clamp connection, after checking that the clamp can attach to your intended support.

  • The 2732 combines a 9.8-inch articulating arm with a super clamp.
  • The clamp has 1/4-inch and 3/8-inch threads and an opening range of 15 to 54 mm; the arm has 1/4-inch screws at both ends.
  • The 2066B is a 9.8-inch arm with 1/4-inch screws on both ends and a 213-gram maximum weight recommendation; it does not include a clamp.

Camera Mounts & Clamps alternative

SmallRig 2905B Field Monitor Mount
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount

Choose the 2066B when you need an arm with reach and compatible threaded connections for a lightweight accessory.

Consider the 2905B if your priority is a dedicated 5- or 7-inch monitor mount with cold-shoe attachment and adjustable tilt tension.

  • The 2905B is a monitor mount designed for 5- and 7-inch camera monitors.
  • It connects by cold shoe, tilts 180 degrees, swivels 360 degrees, and uses a thumbscrew to adjust tilt tension.
  • The 2066B uses a 9.8-inch arm and two 1/4-inch threaded ends, with a 213-gram maximum weight recommendation.

Is SmallRig Magic Arm Worth It?

The SmallRig 2066B is worth considering when you need a flexible 9.8-inch link between compatible 1/4-inch mounts and a very light accessory. Its dual ball heads and cushioned screw connection make it adaptable for compact rig arrangements.

The key buying constraint is its 213-gram maximum recommendation, along with the need for a separate compatible mounting point.

Check both before choosing it; if they suit your setup, this arm offers a straightforward way to reposition lightweight camera gear.

Your review at a glance

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible camera rigging arm for creators positioning a lightweight monitor, light, or microphone on compatible 1/4-inch mounts.

  • 9.8-inch articulating arm for positioning a rig accessory away from its mounting point.
  • Double ball-head design with 360-degree adjustment for positioning at different angles.
  • 1/4-inch thread screws at both ends, for compatible equipment such as a camera flash, microphone, LCD monitor, or LED light.
  • A rubber O-ring cushion around a 1/4-inch screw, designed to help prevent monitor scratches and tighten the connection.

Written by

detroitc3.com Editorial Team

Editorial team

Independent editorial coverage of design & creative work.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2066B Adjustable Articulating Magic Arm

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible camera rigging arm for creators positioning a lightweight monitor, light, or microphone on compatible 1/4-inch mounts.

  • 9.8-inch articulating arm for positioning a rig accessory away from its mounting point.
  • Double ball-head design with 360-degree adjustment for positioning at different angles.
Check Video Reviews on Amazon